1、NFPA 0=Minimal Hazard 4=Severe Hazard HMIS 4.FIRST AID MEASURES EYE CONTACT.Immediately flush eyes with plenty of water.Get medical attention if irritation develops or persists.SKIN CONTACT.Remove contaminated clothing.Wash skin with soap and water.Get medical attention if irritation develops or per
2、sists.INHALATION.If exposed to excessive levels of fumes,remove to fresh air and get medical attention if cough or other symptoms develop.INGESTION.No specific treatment is necessary since this material is unlikely to be hazardous by ingestion.Call physician if pain or discomfort develops.POTENTIAL
3、ENVIRONMENTAL EFFECTS None known.*ANSI Z400.1-1998 format 3.HAZARDS IDENTIFICATION *EMERGENCY OVERVIEW Pale yellow aqueous solution with a slight ammonia odor.Nonflammable aqueous solution.NFPA rating of zero.No immediate hazards associated with the product.*POTENTIAL HEALTH EFFECTS EYE CONTACT.Prol
4、onged or repeated contact may cause irritation.SKIN CONTACT.Prolonged or repeated contact may cause irritation.INHALATION.Prolonged or repeated contact may cause irritation.INGESTION.No hazard in normal industrial use.CARCINOGENICITY:NTP.No ingredients are listed.IARC.No ingredients are listed.OSHA.
5、No ingredients are listed.CHRONIC EFFECTS.Not determined.TARGET ORGANS.Not determined.SIGNS AND SYMPTOMS.Eye and skin irritation(redness or swelling)*2.COMPOSITION/INFORMATION ON INGREDIENTS Contains no hazardous ingredients in concentration greater than 1%.Contains water,builders,and surfactants.Th
6、is MSDS contains valuable information critical to the safe handling and proper use of the product.This MSDS should be retained and available for employees and other users of the product.7.HANDLING AND STORAGE HANDLING.Avoid contact with eyes,skin and clothing.Use in a well-ventilated area.STORAGE.St
7、ore in a cool place in original container and protect from sunlight.Keep container closed when not in use.Use only stainless steel,polyeth-ylene or plastic-lined containers for handling.Do not store in contact with aluminum,zinc,copper or their alloys.SHELF LIFE.Five years from date of manufacture w
8、hen stored in original sealed con-tainer at recommended storage temperature range.STORAGE TEMPERATURE.543C(41110F)5.FIRE FIGHTING MEASURES Nonflammable aqueous cleaner.FLASH POINT.None.LFL.Not applicable.UFL.Not applicable.EXTINGUISHING MEDIA.Use alcohol foam,carbon dioxide,or water spray to extingu
9、ish flames.FIRE FIGHTING.As in any fire,wear self-contained INSTRUCTION breathing apparatus,pressure-demand MSHA/NIOSH(approved or equivalent)and full protective gear.Water runoff may cause environmental damage.Dike and collect water used to fight fire.6.ACCIDENTAL RELEASE MEASURES Clean up spills i
10、mmediately,observing precautions in Section 8 Personal Protection.Absorb spill with inert material(e.g.,dry sand or earth),then place in a chemical waste container.Approved:June 15,2009 0=Minimal Hazard 4=Severe Hazard B=Safety Glasses&Gloves Health 1 Flammability 0 Physical Hazards 0 Personal Prote
11、ction B Health Flammability 1 0 0 Reactivity 1.PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME.MICRO-90 CHEMICAL FAMILY.Mixture CHEMICAL USE.Concentrated Cleaning Solution ISSUE DATE OF MSDS.June 15,2009 MANUFACTURER:EMERGENCY TELEPHONES:International Products Corporation Transportation:201 Connecti
12、cut Drive CHEMTREC Burlington,NJ 08016,USA(800)424-9300 Tel:(609)386-8770(Calls within USA&Canada)Fax:(609)386-8438 (703)527-3887 (Calls from outside the USA)UK BRANCH:Unit 5,Green Lane Bus.Park Non-transportation:238 Green Lane Tel:(609)386-8770 London,SE9 3TL,United Kingdom Fax:(609)386-8438 Tel:0
13、20 8857-5678 Fax:020 8857-1313 CONCENTRATED CLEANING SOLUTION MATERIAL SAFETY DATA SHEET*(MSDS)International Products Corporation 090818 9.PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE.Yellow liquid.ODOR.Ammonia odor.pH(neat).ca.9.5 BOILING POINT.ca.100C(212F)FREEZING POINT.ca.-8C(18F)SOLUBILITY IN WA
14、TER.Complete SPECIFIC GRAVITY(water=1).1.13525C 11.TOXICOLOGICAL INFORMATION Eye:Irritant per USA-FHSA criteria.Not an Irritant per OECD Guideline No.405.Skin:Not an irritant per USA-FHSA criteria.Not an irritant per OECD Guideline No.404.Oral:LD50 is greater than 5g/kg(rats).16.STATE REGULATORY INF
15、ORMATION For details on specific requirements,you should contact the appropriate agency in your state.8.EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING CONTROLS.Good general ventilation should be sufficient to control airborne levels.RESPIRATORY PROTECTION.For most situations,no respiratory protec
16、tion should be needed.SKIN PROTECTION.Wear nitrile or neoprene gloves.EYE PROTECTION.Wear safety glasses with side shields(or goggles).Contact lenses should not be worn.GENERAL HYGIENE.There are no known CONSIDERATIONS health hazards associated with this material when used as recommended.The following general hygiene considerations are recognized as common,good industrial hygiene practices:Wash hands after use and before eating.Avoid breathing vapors.Wear safety glasses and gloves.*EXPOSURE LIMI
