2RIPv1的基本配置Word格式文档下载.docx
- 文档编号:18800961
- 上传时间:2023-01-01
- 格式:DOCX
- 页数:13
- 大小:73.69KB
2RIPv1的基本配置Word格式文档下载.docx
《2RIPv1的基本配置Word格式文档下载.docx》由会员分享,可在线阅读,更多相关《2RIPv1的基本配置Word格式文档下载.docx(13页珍藏版)》请在冰豆网上搜索。
R1(config)#routerrip//启动RIP进程
R1(config-router)#version1//指定使用版本为版本1
R1(config-router)#network172.16.0.0//RIP的主类通告
R1(config-router)#network10.0.0.0
R2(config)#routerrip
R2(config-router)#version1
R2(config-router)#network10.0.0.0
R3(config)#routerrip
R3(config-router)#version1
R3(config-router)#network172.16.0.0
R3(config-router)#network10.0.0.0
步骤3使用debugiprip命令查看RIPv1的收发包的类型,同时看RIPv1是以什么形式发更新包的,使用debugipudp命令验证RIP使用UDP协议,端口号是520。
步骤4使用showiproute命令查看RIP的自动汇总情况
使用showipprotocols明令查看路由协议相关信息
输出信息中的关键知识点:
计时器Sendingupdatesevery30seconds,nextduein27seconds
Invalidafter180seconds,holddown180,flushedafter240
版本Defaultversioncontrol:
sendversion1,receiveversion1
自动汇总Automaticnetworksummarizationisineffect
负载均衡路径Maximumpath:
4
管理距离Distance:
(defaultis120)
r1#shrun
Buildingconfiguration...
Currentconfiguration:
1109bytes
!
version12.4
servicetimestampsdebugdatetimemsec
servicetimestampslogdatetimemsec
noservicepassword-encryption
hostnamer1
boot-start-marker
boot-end-marker
noaaanew-model
memory-sizeiomem5
ipcef
noipdomainlookup
interfaceLoopback0
ipaddress172.16.1.1255.255.255.0
interfaceEthernet0/0
noipaddress
shutdown
half-duplex
interfaceEthernet0/1
interfaceEthernet0/2
interfaceEthernet0/3
interfaceSerial1/0
shutdown
serialrestart-delay0
interfaceSerial1/1
interfaceSerial1/2
ipaddress10.1.1.1255.255.255.252
interfaceSerial1/3
routerrip
version1
network10.0.0.0
network172.16.0.0
noiphttpserver
noiphttpsecure-server
control-plane
linecon0
exec-timeout00
lineaux0
linevty04
End
r2#shrun
1066bytes
hostnamer2
ipaddress10.1.1.65255.255.255.252
ipaddress10.1.1.2255.255.255.252
iphttpserver
r3#shrun
1107bytes
hostnamer3
ipaddress172.16.2.1255.255.255.0
ipaddress10.1.1.66255.255.255.252
end
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- RIPv1 基本 配置