SAP四种安全库存的设置文档格式.docx
- 文档编号:16259310
- 上传时间:2022-11-22
- 格式:DOCX
- 页数:7
- 大小:116.42KB
SAP四种安全库存的设置文档格式.docx
《SAP四种安全库存的设置文档格式.docx》由会员分享,可在线阅读,更多相关《SAP四种安全库存的设置文档格式.docx(7页珍藏版)》请在冰豆网上搜索。
Thedynamicsafetystockiscalculatedintheplanningrunoftheorderproposalquantity.IntheMRPevaluation,MD04-youcanchecktheparametersusedtocalculatethedynamicsafetystockintheperiodtotalsdisplay.Tosetthedynamicsafetystockthemasterdatasettingsrequiredare,
动态安全库存是运行于预测需求的计划。
当运行MD04时,你可以在区间统计界面看到所有的用于计算动态安全库存的参数。
你要设定以下参数才能计算出动态安全库存
1.MaintainMRPview.
1.维护材料主档的MRP视图
2.
InMRP2viewenterthecoverageprofilewhichinconfigurationwillcarrytheelementsrequiredasdetailedbelow.
2.在MRP2视图里,需要设定覆盖组件(coverageprofile)
3.Materialmaster-youhaveMRPtypePD.
3.设定的MRP类型为PD。
ItismaintainedinSPROunderthenode->
覆盖组件在后台配置,路径如下
SPRO-Production-MaterialRequirementsPlanning-Planning-MRPCalculation-DefineRangeofCoverageProfile(DynamicSafetyStock).
.
Itismaintainedwithrespecttoaplantasthecalculationisplantspecific.
Calculation-
Thedynamicsafetystockiscalculatedusingthefollowingformula:
averagedailyrequirements*rangeofcoverage
因为计算是基于工厂的,所以配置也是在工厂的基础上进行的。
动态安全库存的计算公式如下:
动态安全库存=每日平均需求*覆盖的区间
Theindividualparametersaredescribedbelow:
下面是各个参数的解释
Averagedailyrequirements
每日平均需求
Thecalculationoftheaveragedailyrequirementsiscarriedoutusingthefollowingformula:
requirementsinthespecifiedperiods/numberofdaysinthetotalperiodlength。
Youmustmaintainthefollowingparametersforthecalculationoftheaveragedailyrequirements:
每日平均需求的计算公式如下:
每日平均需求=特定区间内的总需求/此区间内的天数
(天数有不同的计算方法,下面有比较详细的介绍。
)
下面的一些参数是在计算每日平均需求中必须的
1.
Periodindicator
区间指针
Youusethisindicatortodeterminethecalendarperiodforwhichyouwanttocarryouttheaveragedailyrequirements.
这一指针用于决定计算每日平均需求的日历区间
Hereyoucanenterthefollowing:
有如下几种设定
weeks(W)周
months(M)月
periodsaccordingtotheplannedcalendar(K)根据计划日历决定
2.
Typeofperiodlength
区间天数的计算方法
Youusethisindicatortodeterminethelengthoftheindividualperiodsindetail.
用于决定计算区间天数的方法
如下几种设定可以用作计算
workdays工作日
calendardays日历日
standarddays标准日
Ifyousetstandarddaysastheperiodlength,youmustenterthenumberofdaysperperiodinthe"
NO.standarddays"
field.
如果设定了标准日作为区间天数,必须要设定每个区间包含多少标准日。
3.
Numberofperiods
区间数
Here,youdefinethenumberofperiodsyouusetocalculatetheaveragedailyrequirements.
在这里要设定用于计算每日平均需求的区间数。
Determiningtherangeofcoverage
定义覆盖区间
Youcandeterminetherangeofcoverageforamaximumofthreeperiodsandyoucanmaintaindifferentcoverageforeachperiod.
Todothis,youmustdefinetherangesofcoverageandtheperiodsinthescreensectionentitled,"
Determinerangeofcoverage"
.
可以为三个时间范围设置不同的覆盖区间
Youalsohavetheoptionoflimitingtherangeofcoverageineachofthethreeperiodsbyenteringaminimumandamaximumrangeofcoverage.Thesystemcheckswhethertheactualrangeofcoverage(availablequantity/averagedailyrequirements)liesbelowtheminimumrangeofcoverageorabovethemaximumrangeofcoverage.Ifthisisthecase,thedynamicsafetystocklevelisrecalculatedusingtheinformationforthetargetrangeofcoverage.
也可以为不同的时间范围设置覆盖区间的范围。
填入最小和最大区间即可。
系统会检查实际覆盖区间(可用数量/每日平均需求)是否小于最小或大于最大。
如果是这样的,动态安全库存会用目标区间来重新计算。
以下有两个例子:
Example–1
例一
Coverageprofile-001,withfollowingsettingsassigninmaterialmaster-MRP2view,
Periodtype=M(月)
Noofperiod=2(区间数)
Typeoflength=3(标准日)anddays/period=20(每个区间包含20个标准日).
Rangeofcoverageforfirstperiod(target)=3(目标覆盖区间),noofperiods=2(区间数)
Letsussayrequirementsareasbelow–
需求如下
12.11.2007-1000
19.11.2007–2000
Noofdays=2*20=40(天数)
averageDailyrequirement=(1000+2000)/40=3000/40=75(每日平均需求)
Safetystockrequirement=75*3(target)=225.(动态安全库存)
RunMRP,resultisasbelow
运行MRP,结果如下
12.11.2007-plorderqty-1225availableqty
-1225
12.11.2007-VSF1000-availableqty
-225
19.11.2007-plorderqty-2000balance-2225
19.11.2007-VSF2000-
availableqty
-225.
Example-2
例二
Coverageprofile-002,withfollowingsettings,assigninmaterialmaster-MRP2view
Period=M(月)
Noofperiod=1(区间数)
Typeperiod=1(工作日)i.e.workingdaysasperfactorycalendar,pleasecheckyourfactorycalendar.itistakingformnoofdaysoffactorycalendar,removethedayswhichalreadypassed,thenremoveholidays.(根据工厂日历计算。
从总天数中减去已过的天数和假日)
Example-Infactorycalendar-
工作日举例
2,3,9,10,16,17,23,24,30areholiday.i,e9daysin30daysareholidays,
2,3,9,10,16,17,23,24,30是假日。
一共9天
First,todayisleussay8th,hencefrom30daysremove7days,(asitisalreadypassed),henceleftwith23days.
今天是8号,所以要从30天里减去过去的7天,剩下23天
Holidaysapplicableare,9,10,16,17,23,24,30i.e.7daysi.e.from23daysIneedtoremove7dayshencetheworkingdaysareonly16days.
假日中,2,3已经过去,还剩7天。
要再减去7天,剩下16天。
rangeofcoverage=target7,(目标覆盖区间)
noofperiod=1.(区间数)
nowmyrequirementis3000inthatmonth
当月需求一共3000
dailyaverageconsumptionis3000/16=187.5(每日平均需求)
safetystock=187.5*7=1313.(动态安全库存)
MRP结果
12.11.2007-plorder-1qty2313availableqty
-2313
-1313
19.11.2007-plorder-2000availableqty
-3313
19.11.2007-VSF2000-availableqty
-1313.
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SAP 安全 库存 设置